3DINNOVATIONS Black V6 J-head Hotend Bowden Extruder Full Set with Fan, 12V Heater, PTFE Tubing for 0.4mm 1.75mm Bowden for 3d printer

ASIN : B07QFMSTLL

Price: ₹1,099.00 - ₹975.00
(as of Jul 07,2022 19:00:14 UTC – Details)

Type: For Bowden type Extruder arrangement Black body.

Package Included :
1x Black body J-head Hotend for V6 Filament Bowden extruder
1x Cooling fan
1x Thermistor:100K NTC B 3950 ±1% ,1m long black color
1x Heater Cartridge:12V 40W,1m long black color
1x PTFE/ Teflon Tube: OD:4mm, ID:2mm, 1m long
1x PC4 M6 Connector

V6 has the following advantages over V5:
-Height: The most obvious change is that the E3Dv6 is considerably shorter than the v5.
-Bore: There’s a consistent 2mm of space for the filament from the moment it goes into the PTFE tube, to when it reaches the nozzle. This results in almost zero jamming chances.
-Thermister: The v6 has a simple screw in method for securing the Thermister, instead of using tapes or messy silicone/adhesives.
-Heater Cartridge: An increased point of contact between the heater block reduces the power required and improves heat up times and puts the heater closer to the nozzle.
-Fan Shroud: Has a custom injection molded fan shroud. This makes for a much easier and cleaner install.
-Nozzle: The most important improvement on the v6 is the new compact design. The v6 adds a second transition. This reduces the amount of torque required to extrude filament and reduces the likelihood of jamming.

Cooling fan: 12V; 30X30X10 mm (with black color fan shroud)
Thermistor:100K NTC B 3950 ±1% ,1m long; black color cable (with XH2.54 Pin connector)
Heater :12V 40W,1m long; black color cable
PTFE Tube: ID: 2mm, OD: 4mm ; PC4 M6 Connector