Flashforge Creator Pro/Dreamer/Inventor FDM 3D Printer Build Plate Sticker
₹1,299.00 ₹999.00 (-23%)
- Pre-cut to fit the dimensions of the Flashforge Creator Pro/Dreamer/Inventor on self adhesive sheet (232 X 154mm).
- Very durable surface – Will last for dozens of prints
- Will greatly reduce warping and/or curling during printing
- Greatly reduces platform pre-heating time
- Base of 3D Prints result with a glossy smooth surface finish.
₹ 1,299.00 - ₹ 999.00
(as of Nov 01,2020 12:11:51 UTC – Details)
The Flashforge Platform Surface is heat resistant, specially textured plastic sheet that adheres to your bear print bed or build plate. These sheets are more rigid than Kapton or masking tape and therefore much easier to install and apply to the build plate. It is much less susceptible to getting air bubble entrapment. Once your bed is correctly leveled, 3d printed objects are less likely to warp of come off the bed. When the prints are finished, the models pop off with less need for prying of scraping. This 3d printing surface is more durable and more effective at protecting the build plate. As the surface is suitable for both PLA and ABS, it is not necessary to change the platform surface between builds.
Very durable surface – Will last for dozens of prints
Will greatly reduce warping and/or curling during printing
Greatly reduces platform pre-heating time
Base of 3D Prints result with a glossy smooth surface finish.
- Store Name: Amazon
- Vendor: Akash Mane
- No ratings found yet!